Doepfer A-185-2V Precision CV Adder : Eurorack Module : NEW DETROIT MODULAR]

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.

When ordering from the US, parcels may be subject to import tax and duty charges, which the buyer is responsible to pay. DOEPFER A-185-2V PRECISION CV ADDER VINTAGE EDITIONMANUFACTURER DESCRIPTIONModule A-185-2 is a precision control voltage adder/buffer. Precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of VCOs (e.g. from keyboard + sequencer 1 + sequencer 2). Summing resistors matched to 0.1% are used to obtain an accuracy of 0.1% for the added voltages.The module is equipped with four CV inputs: one with attenuator and three without attenuator. Each input is normalled to +1 V (i.e. if no plug is inserted the input contributes 1 V to the sum appearing at the output).The input with attenuator can be used for common modulations (e.g. from an LFO, ADSR, Theremin, Pitch-Bender) for all VCOs connected to the output. The Lev.1 control is used to adjust the depth of the modulation, the first switch selects the polarity of the modulation. If no signal is connected to the first socket the attenuator works as a (fine) tuning knob because a voltage in the range 0…+1V (right position of the switch) or 0…-1V (left position of the switch) is added to the CV output.The inputs without attenuators are planned to add control voltages coming out of keyboards, sequencers, Midi-to-CV interfaces, ribbon controllers or other CV sources that follow the 1V/oct standard. For example the CV of a keyboard can be used to transpose the CV coming from a sequencer, or the CV of a slow sequencer can be used to transpose the CV from a fast sequencer.Each input is equipped with a three-position switch that determines if the corresponding voltage is added (right position), subtracted (left position) or if the input has no effect (center position). If no plug is inserted the corresponding switch works as an octave switch for the lower three sections as the default 1 V are added or subtracted to the output voltage according to the switch position. The first switch can be used to add a variable voltage to the sum output. The variable voltage is adjusted with the Lev.1 control and the knob works then as kind of a (fine) tuning control.The module is equipped with 4 outputs: three non-invertíng and one inverting ouput. An internal jumper can be used to connect the non-inverted or inverted output to the CV line of the A-100 bus. That way the module can used to control several VCOs that are connected to the same bus board as the A-185-2 (same functionality as A-185-1).Remark for A-185-2 users: There is a pin header with three pins (labelled JP5) near the bus cable connector. If no jumper is installed there is no connection between the outputs of the A-185-2 and the CV line of the A-100 bus. In the lower position the normal CV output of the A-185-2 is connected to the CV line of the A-100 bus. In the upper position the inverted CV output of the A-185-2 is connected to the CV line of the A-100 bus.Important Notes:The module comes with an installed jumper, i.e. one has to remove the jumper if e.g. an A-190-1/2/3 or A-185-1 is already connected to the CV line of the same bus board! If the A-185-2 should be used as CV source for the A-100 bus the CV connection of another CV source (e.g. A-185-1 or A-190-1/2/3) has to be removed. Otherwise a short circuit is made between the outputs of the CV transmitters ! Please refer also to the technical notes concerning A-100 bus principles:Do not insert patch cables into the CV input sockets while the other end of the cable is open. The A-185-2 features high impedance inputs. Cables with open ends will cause random voltages. The other end of each patch cable must be connected to a voltage (e.g. sequencer CV output, USB/Midi-to-CV interface CV output, LFO output, ADSR output, Theremin CV output, ribbon controller CV output and so on).Breite/Width: 6 TE / 6 HP / 30.0 mm
Tiefe/Depth: 50 mm (gemessen ab der Rückseite der Frontplatte / measured from the rear side of the front panel)
Strombedarf/Current: 10 mA SHIPPINGDomestic items usually ship within 24 hours of paymentFree shipping on most items to the Contiguous United States (48 states)USPS tracking and insurance includedExpress shipping availablePO Box Addresses will ship via USPS PriorityImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.

Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. Local duties, taxes and charges are not included in the sale price or ship charges. Detroit Modular is not responsible for any taxes outside of Michigan and or the USA. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please be aware that in some cases return shipping can cost as much as double the original ship cost. RETURNSWe have a 14-day return period. If for any reason, you aren’t getting along with the new purchase we will take it back. We will exchange for an alternative item or store credit, less the original shipping fees (this includes the shipping fees incurred by DM, and any free shipping items). Items must be returned in the original packaging, with all included items and documentation, and be returned in the condition that they were sent. Returned items for refund that are not broken or not being exchanged due to fault are subject to a 15% restocking fee. Any item returned with damage, rack rash, or any other physical markings not allowing us to sell as new will be subject to a minimum of 25% restocking fee.
Defective units will be exchanged for the same unit within the 14-day period.
Items that can not be returned include: software, units with contents or packaging that is damaged or missing, and used gear.
Please contact us before returning any items. Credit will be issued according to your payment method, or if you prefer store credit. If any product is damaged in shipping, you should contact us immediately so that we can address the issue promptly with the appropriate carrier. Any return sent back with out contacting us first will not be honored.Always know that we will do whatever we can to make it right.
PAYMENTSWe accept all forms of payment including Paypal. If paying via Paypal the shipment must be directed to a confirmed address. Shipments to Michigan addresses will include 6% Michigan sales tax.
MPN DOEPFER A-185-2V PRECISION CV ADDER VINTAGE EDITION Brand DOEPFER UPC Value Does not apply UPC Does not apply

Category: Musical Instruments:Pro Audio Equipment:Synthesisers and Sound Modules
Location: Birmingham, Michigan