If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
NOTE This is a Short form kit (PCB and Instructions only) for a mixing desk power supply as shown in the first picture – second picture of completed unit is for reference only.
This is revision two of my earlier power supply. while it is slightly larger it does include a few improvements over the previous board.
This board has 2 Oz copper cladding (twice as thick as regular PCB 1 Oz) and includes solder mask and stencilled overlay.
As the power supply uses a Voltage multiplier to generate the 48V supply it only requires a readily available 16-0-16 or 18-0-18 V transformer.
This power supply may be used to replace a faulty supply in an existing desk or as a replacement for an external supply.
The power supply is equivalent to the Soundcraft/Spirit CPS 150 and can deliver +/- 17 Volts at 1.5 Amps and +48 Volts at 500 mA and has an option for an additional 12 Volt (at 1 Amp) Lamp supply.
I have created a Digikey BOM for this project, which includes most parts for this
– This has higher spec parts in some cases (mostly higher value capacitors), as it made no sense to pay more for lower spec components.
http://www.digikey.com.au/short/3h5cnh
Note I have a number of these to sell, but Ebay will only let me list them one at a time unless I have a merchant account.
As I am not (yet) earning enough money to justify a merchant account I will just relist as/if they sell.
So if you would like more than one, I can do a better price (depending on quantity) as well as possibly saving on shipping so contact me.
Further information may be found at:
http://www.atps.net/Projects/SD_PSU.html
or
http://www.atps.net/Projects/SDP_2B.pdf
forgot to add, may be picked up from Hornsby, north of Sydney
Unfortunately it is starting to cost too much re-sending items due to non-delivery by tracked means, so I am going have to exclude some Countries from my shipping list.If you do live in any country excluded in this listing, and wish to buy these PCBes shipping will cost $32 – please contact me
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Musical Instruments:Pro Audio:Mixers
Location: Hornsby, NSW