If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
Type1 bare PCB ( not incldue any other parts)
Type 2: DIY kit ( will need youself to solder and test it)
Type 3: Assembeld board. ( we will solder and test it well. when you choose this type. Please tell us what the output votlage is your need. Thanks)
PCB specification: 101mm*76mm*1.6mm, 1OZ copper, gold plated.
2019 Version Sigma22 V2.0 series regulated power supply board ( HP-1B for preamp DAC or some other small currect using)
New version V2.0 optimization point:
Use AMB Sigma22 V2.0 circuit diagram;
Compared to HP-1, the new version is smaller
Single-bridge rectification for easy use of three-wire output transformers
[Description]:
Sigma22 (pre-stage) series voltage regulator circuit, single-digit UV level index, infinitely close to the battery level; hearing neutral, background super quiet, high resolution. By replacing the Zener tube, it can be used as a 5V-36V dual power supply output, which is very suitable for the pre-stage and power amplifier voltage level mills.
[Introduction]:
Fully discrete component structure, single-stage series regulator design.
No ic use, so that the entire design can control each control loop node to achieve the best performance parameters of the voltage regulator.
The complementary voltage stabilizing structure, the negative voltage regulator part is the complementary mirror image of the positive voltage regulator part.
Ultra-low noise, extremely high PSRR (power ripple rejection ratio).
The low-pass filter’s knee frequency is as low as 1.6 Hz to prevent diode switching noise from entering the error amplifier. This part also has a soft-start function.
Effectively guarantees the output noise of the regulated power supply as low as V.
With high bandwidth, the Sigma22 is designed to have its own bandwidth and far beyond the audio bandwidth.
The output impedance of sigma22 is far lower than the best low-ESR large-capacity electrolytic capacitors on the market. Due to the high bandwidth design of sigma22, sigma22 can easily cope with the ever-changing amplifier current requirements and ensure that the back-end amplifier can reach its full potential. (The output impedance is as low as , 1 = 1000m = 1000000).
Voltage setting:
When Output is: +/- DC5-8V, Zener diode Z-D using 2V7
When Output is: +/- DC9-13V, Zener diode Z-D using 4V3
When Output is: +/- DC14-19V, Zener diode Z-D using 6V2
When Output is: +/- DC20-24V, Zener diode Z-D using 7V5
When Output is: +/- DC25-36V, Zener diode Z-D using 12V
the DIY kit will include 2V7 4V3 6V2 7V5 12V 5pcs Zener diode
Input voltage requirements:
Generally, the voltage difference after rectification of the input voltage should be 6-10V higher than the output voltage.
[Calculation formula: input AC*1.414-output DC=6-10V]
if the voltage difference is enough, and Do not consider heat dissipation. this board can output max currect about 1.5A. but the standard heatsink can bear about 100mA currect load. if you need higher currect. please Strengthen the radiator.
About heat dissipation:
The heat sink as standard on the kit and the finished board can withstand nearly 0.2 watts of power consumption. It can be predicted by PT=VI. When the heat is too large, it is recommended to use the chassis bottom plate for heat dissipation.
Shipping time:Default send by airmail,about 14-20 business days can arrive most of europe countries, Russia, Brazil,Africa.Ukraine and some other remote countries will need some more days.
Payment:We ONLY accept PayPal. Payment must be made within 3 days of the auction end time. Non-Paying bidders will be reported.All items will be shipped within 1-3 business days (from china)upon receipt of payment.We ONLY send item to buyer’s registered Paypal address,Buyer must be responsible for their postal addressCustoms & duties:For cross-border transactions,.we are not responsible for tariffs and duties. However, buyers may be responsible for actual, applicable tariffs, and duties as requested by respective country laws
Return & Exchange:>> Some items return is accepted within 7 days after the buyer’s receiving the item.(please see the detail describe)[In case of DOA (Dead on Arrival), please report within 3 days]>> Returned item has to be new, unworn and in its original condition.
>> After getting the returned item, we will refund the customer at the item’s price ( excluding the shipping costs to and from )On 30-Jul-19 at 05:20:12 BST, seller added the following information:
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Musical Instruments:Pro Audio Equipment:Amplifiers
Location: 广东