Yamaha EX5 and EX5R - Version 1.11 [Main ] and 1.14 [TG] Upgrade Firmware Update

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.

Yamaha EX5 and EX5R – Version 1.11 [Main ] and 1.14 [TG] Upgrade Firmware Update

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.

Yamaha EX5 / EX5R firmware OS upgrade: v 1.14 [TG] and 1.11 [MAIN]This is firmware update 1.14 / 1.11 This operation system update / upgrade requires four EPROM chips as revealed in the eBay article’s photos and the chips will be labeled to help you locate the correct chip socket. For more info, please check below. You can check your current OS version:on the EX5 press: VOICE + H + 8 (Bank Buttons)
on the EX5R press: VOICE + 9 + 6 (Keypad)Features/improvements: Symptoms in V 1.00 addressed in V 1.01 1. Effects can not be activated intermittently. 2. After entering Voice Edit in Performance Mode: if a “Store” command is executed, the unit’s output is muted. 3. When a song is played back with Arpeggio “ON”: if the “REW” or “FWD” key is pressed and held, Arpeggio is not heard. Symptoms in V 1.01 addressed in V 1.02 1. If a COMPARE command is executed during Voice Edit, and then Edit mode is accessed again, the “INC” key, “DEC” key, and the encoder will not operate. 2. After setting the pattern to 51 in Song Play Mode, and then using a CANCEL command to return to the previously selected pattern: if playback of the previous selection is then attempted, the selected pattern jumps back to pattern 51 after 1 bar, then playback stops. 3. If a Clear Song command is executed in Song Job Mode, the “Beat” setting data remains. 4. When using MTC Sync in Song Rec Mode: if real time recording is finished and stopped, the unit relocates to the beginning of the second bar restrings, bypassing the first bar. 5. After a JOB (EDIT) is performed in Pattern Mode: if UNDO is executed in SONG MODE, the unit will not operate properly. 6. After a JOB (EDIT) is performed in Pattern Mode: if UNDO is executed in Pattern Mode, the unit will not operate properly. 7. In Arpeggio Play Mode with the settings of VEL = THRU and MODE = SEARCH LOW, detected velocity is 127. Symptoms in V 1.02 addressed in V 1.03 1. If Sync is set “ON” for Voice / LFO / LFO1 in Voice Edit mode, LFO2 will be activated. 2. In FULL Portament Mode: if a Performance is stored with Portament SW = ON, Portament will not be activated. 3. Consider the following sequence: The unit is loaded in the song, then at SMF file is loaded, and finally the unit is placed in performance mode. Under these conditions the loaded song may not play back with PLAY held down. Symptoms in V 1.03 addressed in V 1.04 1. In Play Mode: if the unit is “toggled” several times between two different Performance settings, the voices may not follow toggled selections. 2. The following command sequence causes the unit to lock up: press F7 (CTRL) in Performance Edit Mode, bring the cursor to “PB Upper” with the [] key, then press F8 (PRE), bring the cursor to “Init KN6 “with the [] key and press F7 (CTRL) again. Symptoms in V 1.04 addressed in V 1.05 1. If notes are changed in Performance Edit Mode and the Portament SW is “ON”, Portament will not be activated even though “ON” is indicated. 2. If Voice Bulk data is transmitted to an external sequencer and then is loaded back into the unit, the AMP Scaling value is changed. 3. If Voice Bulk data is sent or received when LFO Speed is 32 or more, the LFO Speed setting is changed. 4. If the INC / DEC keys are quickly toggled while in Performance Play Mode, FDSP voices will eventually stop playing back. Symptoms in V 1.05 addressed in V 1.06 1. When Track Mute Is Activated in Song Play Mode, the Mute status may be changed. 2. When material is restringsd in real time on one track in Pattern Rec Mode, the other tracks start consuming memory even though these tracks are not recording. So, the memory consumption remains the same even when the pattern is cleared. Symptoms of V 1.06 addressed in V 1.07 1. Disk If a HDD of 2GB or more is connected, the HDD can not be formatted. 2. Pattern Rec. When recorded in real-time overdub, the timing of the corrupted data can be corrupted. 3. Song Rec. When data is loaded in via bulk dump from a QY product (or similar product): when the data is played the unit may lock up. Issues with V 1.07 rated by V 1.08 * When making a new waveform by combining a sample from a preset bank with a sample from another bank, in Sample Edit mode: the sample from the preset bank is not played back properly. Symptom in Ver. 1.08 rated by V 1.09 If songs, etc. are played back with the external synchronization, the synchronization is out of phase. If music with 70 bars or more is played back, the symptom is distinct at the end of the music. V 1.09 to V 1.10 Update the Main ROM to 1.10 when mLAN-EX is installed on the EX Series. Symptom in V 1.10 addressed in V 1.11 When the following procedure is executed, different names appear on the “Performance Name”. 1. Select the “Performance” which is included in the “VL VOICE” 2. Push the “EDIT” SW. 3. Select the “Common Parameter” and “Rev”. 4. Push the “Copy” on the display. 5. Different names will appear on the “Performance Name”. Symptom in TG ROM addressed in V 1.14 When the following procedure is executed, The Poly Note of the EX5 / 5R is reduced by half. 1-1) Select the Init Perf. 1-2) Select a Voice which includes FDSP to the Part 1. 1-3) Select a AWM Voice. 1-4) Set the Individual Output to Ind3, Ind4, Ind5 or Ind6. 2-1) Select the FDSP on the Voice Mode. 2-2) Change the Mode to Performance Mode, and select the Init Perf. 2-3) Set the Individual Output to Ind3, Ind4, Ind5 or Ind6.
NOTE: Fully verified before shipping and professionally packaged in anti-static material. The Yamaha EX-5 on the picture is not for sale 🙂 This works for both the rack and keyboard version.Info:So please note that the purpose of this, is to help the end users updating their legacy/discontinued product due to that the original/authorized provider isn’t able anymore. In case of any OS firmware copyright problem, please contact me directly and this eBay article will instantly be taken down from eBay.[What is this?]:Yamaha, synthesizer, upgrade, midi, firmware, eprom, sequencer, sampler, keyboard, rack, workstation, update, repair, mod, fix, VL, workstation, digital, rare, analogSo please checkout my other eBay articles. Maybe I have more articles that are interesting for you and please do not hesitate to contact me, if you have any questions 🙂 Marke Yamaha Herstellungsland und -region Deutschland EAN Nicht zutreffend Modifizierter Artikel Nein Modell EX5 / 5R Herstellernummer nicht zutreffend Auslndisches Produkt Nein Angebotspaket Nein Produktart Groovebox Sequencer Synthesizer Sampler

Category: Musical Instruments:Pro Audio Equipment:Samplers and Sequencers
Location: Offenbach, Hessen