If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
Gold TRS Jack to Female XLR Cable Neutrik 1/4″ Balanced Lead Van Damme Patch MicWith gold contacts for that extra high quality look of professionalism. Quality audio sound and robustness. Using Neutrik connectors NP3X-B Jack, NC3FXX-B 3 pin Female XLR and Van Damme OFC balanced cable in the assembly which without a doubt are some of the best names when it comes to audio.
Available Colours: Black Brown Red Orange Yellow Green Blue Purple Grey White.
Standard Connections are made between the connectors on:Pin 2 XLR – Tip Jack (Hot)
Pin 3 XLR – Ring Jack (Cold)
Pin 1 XLR – Sleeve Jack (Screen)These are standard connections.Applications examples:Line mixer XLR output to active speakers using TRS jack inputs on the active speaker
XLR outputs on a keyboard to active speakers using TRS jack inputs on the active speaker
XLR outputs on compressors, limiters, graphic equaliser, audio processors, to balanced mixer inputs, aux inputs, matrix inputs
Link lead between power amplifier inputs – XLR balanced out yo TRS input
Balanced microphone to microphone balanced mic input Jack
Patching in racks between FX units, EQ media output devices.
Can be used for any mic/line level use
Mixer output to active speaker input (note an active speaker is a speaker with an amplifier built into it)Please note that all inputs and output must be balancedThere are so many applications to list – if you are unsure why not ask a question? We have extensive knowledge… For mic/line level use only – Never to be used for low impedance, such as, power amplifier output to passive speaker – if you need this type of lead contact us we can make it. This lead is a balanced configuration and is intended for balanced audio equipment.Note if you use this lead on a piece of audio equipment that doesn’t have a balanced input or output your audio may not sound correct as pin 3 will not be connected. Please ensure that both your input and output is balanced before buying this lead. Please consult your user manual for both of your input and output audio equipment if you are unsure.Important – Lead length Reference PointsPLEASE MEASURE UP CAREFULLY TO AVOID ERRORSLeads 1m or less (patch leads) will be measured visible cable from the rear black boot of the connector. We add 110mm of cable FREE to compensate for the connectors.Leads over 1m will be measured cut length of cable. Both of the connectors will use up 110mm of cable.If you need any specific length or need a little extra please ask – it can be made to that length as these are made to measure when we receive the order. Contact through ebay messages.
We can make the lead to an exact length if you want – Order the lead that is slightly longer and message us through ebay.If you want a longer lead let us know.Van Damme Cable Specification:A cable that is trustworthy reliable hard wearing. Van Damme Tour Grade Classic XKE Microphone cable combines flexibility, durability, noiseless operation and excellent handling characteristics. Van Damme cables can be found in many film and recording studios, professional touring applications, professional DJ setups, education sectors, hire companies. It really is a great cable. There aren’t many cable companies that do have their own website but Van Damme is one of the exceptions. Their website has many a famous artist on there and many stories where Van Damme cable has been used in touring and hire applications. Mechanical specification cable
Conductor Material Bare silver plated ultra pure oxygen free copper wire
Stranding 7 x 0.10mm
Material Bare ultra pure oxygen free copper wire
Stranding 21 x 0.10mm
Insulation Material XLPE Cross linked polyethylene
Diameter 1.60mm 0.10
Colour coding Red, Blue
Cabling Type Twisted pair with cotton yarn fillers & paper wrap
Lay length 25mm
Screen Type 80 x 0.10mm close lap spiral bare oxygen free copper wire
Jacket Material Flexible PVC/Neoprene composite
Average thickness 1.40mm
Overall diameter 6.35mm 0.15
Physical properties unaged
Jacket (at 60C) Tensile strength >8N/mm2
Elongation >250%
Heat shock test 120 C x 1 hour – no cracks
Test voltage 1000 Vdc x 1 minute OK
Electrical characteristics
Resistance Conductor Ohm/Km <85
Screen Ohm/Km <85
Insulation M Ohm/Km >5000
Capacitance Core to core pF/m 56 nominal
Neutrik Connectors:Neutrik make some of the best connectors that are available the world over. There are many copies of the Neutrik connectors available on the internet, don’t be fooled by the cheaper makes they may break down and cause problems, why risk it? These are genuine Neutrik connectors. It really isn’t worth buying cheaper inferior audio leads.
We make this lead
We have been in the audio industry for well over 30 years. We make this lead up using Neutrik and Van Damme cable in our workshop made professionally for you with our years of experience you are in safe hands. 4% Silver Solder is used with our advanced soldering equipment in making this lead.
NOTE : Please note that due to current situation there might be delay in delivering the orders so please do not panic and your orders will be delivered to you as soon as possible
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Musical Instruments:Pro Audio Equipment:Cables, Leads and Connectors
Location: CRADLEY HEATH