If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
From ourselvesStarting or expanding a Reggae or Dub club? This would make a great first system.
We are one of the Norths leading PA, Lighting and Rigging professional suppliers of hired, venue, festival and touring systems. The system has been stripped back, renovated and tested by our experienced audio department – very clean and well presented. It is less popular nowadays as not line array technology but when systems like this were the vogue it was very popular (we are now involved in larger venues and festivals).
Although not a current product but parts are available from HK-Audio. It comes with the AC22 crossover, clips to stop the cabs shaking apart, travel boards for the base bins and grills for the mid/tops (but we think they are way nicer without them).
Note collection from Trafford Park in Manchester only. We can deliver within 25 miles at a separately negotiated cost.
From a web page which had clipped the Manufacturers information. The RT 112 F is a passive mid/high loudspeaker enclosure for use in biamped sound reinforcement systems. It is specifically designed for use in combination with the horn-loaded subwoofer HK AUDIO RL 118 or RL 118 F. It is especially recommended for its vocal intelligibility, exceptional phase-linear response and directivity as well as its extremely high SPL output.The RT 112 F is primarily designed for sound reinforcement applications requiring high sound-pressure levels for mid-throw or long-throw use.For maximum operating efficiency, the use of an HK AUDIO DFC
Digital Field Controller is recommended, or, as an alternative, the analog controller HK AUDIO AC 22 with the appropriate module.Design and components:
The RT 112 F loudspeaker system consists of a horn-loaded 12″ B&C cone woofer and 2″ B&C high-frequency driver mounted on a 50 x 25 constant-directivity horn. The two drivers are axially aligned. The shape of the cabinet allows dual-function directivity: by simply turning the cabinet on its side, the directional characteristics of the horn change from 50 x 25 to 25 x 50.Acoustic and electronic details:
The RT 112 F has a frequency range from 130 Hz to 18 kHz ( 3dB) and a power-handling capacity of 300 watts RMS (8 ohms). The sound pressure level measured at 1W@1m is 112 dB (in half-space), whereas the maximum sound pressure level (at 1m) is 140 dB (in half-space).The rear panel of the RT 112 F incorporates one 4-pin male EP 4 and one 4-pin female EP 4 connector, all of which are recessed. The connectors are wired in parallel. Pins 1 and 2 carry the mid/high signal. A low-frequency signal can be passed through to the RL 118 (F) subwoofers on pins 3 and 4.Physical description:
The cabinet is constructed of 3/4″-thick, 13-ply void-free Baltic birch plywood, and is 23.5″ wide by 25.5″ tall by 34″ deep (60 x 65 x 86 cm) including wheels. Weight is 165 lbs (75 kg).The housing is finished with a waterproof grey two-part poly-urethane topcoat. The baffle is covered with a rugged grille cloth.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Musical Instruments:Pro Audio Equipment:Speakers and Monitors
Location: Manchester