HzmandC Microphone Condenser Sound Recording Upgraded Bm 800 Usb Wired Microp S8M4

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
HzmandC Microphone Condenser Sound Recording Upgraded Bm 800 Usb Wired Microp S8M4

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.

 

Hzm&C Microphone Condenser Sound Recording Upgraded Bm 800 Usb Wired Microp S8M4 Q1: If the microphone is not working, what should I do? Answer: 1.Unplug the USB cable to check whether the pins at the bottom of the mic are loosened. 2.Restart computer and re-plug the mic to other USB port. 3.If the “USB PnP Audio Device” appears in the sound settings of computer(below are the methods how to get to sound settings), the mic is able to work. (Windows: Right click speaker icon on right corner of computer”Recording Device” Mac: Click “System Preferences””Sound””Input”)If not, please email us. We will send you a new USB cable to replace. If the pins are not loosened, the problem will lie in the USB connector. Q2: If the mic has hissing what can I do? Answer: The reasons are manifold, we’re not sure what makes the mic perform bad, though we hope you can try out the suggestions below to see if they can help. 1.Re-plug the USB cable into the microphone. If the cable gets loose, noise is easily generated or transmission of signal may run into problem.2.Reset computer and re-plug microphone into other USB port. 3.Place it not too close to any power source or computer host. Check whether there’s smart-phone near by the USB cable. 4.Set the on-body control of mic and input/output level of computer at 50%-75%. Volume is the culprit for noise. (Windows: Right click speaker icon on right corner of computer”Recording Device”/”Playback Device”right click “USB PnP Device”/default speaker”Properties””Levels”. If there’s “Microphone Boost”, turn it to 0-10dB. Mac: “System Preferences””Sound””Input”/”Output””Input Volume”/”Output Volume”) 5.(If using Windows computer,) disable all sound effects.(Right click speaker icon on right corner of computer”Playback Device”right click the default loudspeaker”Enhancements”click “Disable all sound effects”.)Q3: If the mic disconnects itself without warning, what can I do? Answer: There are two reasons for this situation. One is that the poor connection. The other is that the USB cable is broken. If you hav

 

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay

 

 


Category: Musical Instruments:Pro Audio Equipment:Microphones
Location: Shenzhen