If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
RCA to Male XLR Cable Gold Phono Lead Van Damme Subwoofer Neutrik Rean (Options See Below)
Great sound quality, robustness, that is what you will get from this lead.
Designed to go from an RCA Phono output to an XLR input. The audio source could be any line level audio equipment, examples CD player, Tape Deck, Media player etc. The XLR would go into an audio input, this could be a mixing desk, active speaker, active subwoofer etc. The cable is dual screened to help with noise reduction.
This lead is made by us. We have been in the industry for over 30 years and have vast experience in soldering. We use advanced soldering equipment as well as 4 percent silver solder in its construction.
This is for one lead, sold as a single lead.
Options
We also sell this cable with red/white ID colour rings/boot, for left and right audio. (Sold as single leads)
Cable Length – Important
PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS
Leads 1m or less (patch leads) will be measured visible cable from the rear boot of the connector. We add 90mm of cable FREE to compensate for the connectors.
Leads over 1m will be measured cut length of cable. The connectors use up 90mm of cable.
If you need any specific length or need a little extra please ask – it can be made to that length as these are made to measure when we receive the order. Contact through ebay messages.
We can make the lead to an exact length if you want – Order the lead that is slightly longer and message us through ebay.
Neutrik Rean Connectors
We only use genuine connectors. We use NC3MXX-B Male Gold XLR and NYS373-0 Male Gold RCA. Both connectors have gold contacts, black outer shell and cord grips built inside them to enusure cable stays firmly inside the connectors.
Van Damme Cable Specifications
Van Damme Pro Grade Classic XKE Instrument Cable:
Now with Van Damme new logo on the cable. Low capacitance, Oxygen Free silver plated Copper for better sound reproduction over just copper cable, low capacitance. Commonly used for unbalanced input and output audio devices. The cable has excellent noise rejection due to its tight construction dual screens of conductive thermoplastic and close lapped copper screen.
Mechanical specification – Van Damme cable
Conductor Material Bare silver plated ultra pure oxygen free copper wire
Stranding 3 x 0.20mm
Material Bare ultra pure oxygen free copper wire
Stranding 4 x 0.20mm
Insulation Material Foamed Polyethylene
Diameter 1.60mm 0.10
Screen 1 Type 0.40mm conductive thermoplastic
Screen 2 Type 80 x 0.10mm close lapped oxygen free copper wire
Jacket Material Flexible PVC/Neoprene composite
Average thickness 1.70mm
Overall diameter 6.00mm 0.15
Physical properties unaged
Jacket (at 60C) Tensile strength >8N/mm2
Elongation >250%
Heat shock test 120 C x 1 hour – no cracks
Test voltage 1000 Vdc x 1 minute OK
Electrical characteristics
Resistance Conductor Ohm/Km 47
Insulation M Ohm/Km >5000
Capacitance Core to shield pF/m <90
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Musical Instruments:Pro Audio Equipment:Cables, Leads and Connectors
Location: CRADLEY HEATH