RCF AX 8042 DSP Matrix-Mixer and Automixer from RCF

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
RCF AX 8042 DSP Matrix-Mixer and Automixer from RCF

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.

The AX 8042 DSP Matrix-Mixer and Automixer from RCF is a versatile digital matrix-mixer designed on a powerful DSP platform, dedicated for install sound and commercial audio applications. It has 8 universal MIC-LINE inputs, (one can be set as noise detection input) and 6 outputs on 4 lines.A large number of audio parameters can be set, using to the available processing power. Moreover, the possibility of linking two AX 8042 to create a 16-input, 12-output matrix is available, thanks to the IN/OUT RJ 45 digital ports on the rear panel. A slot on the rear panel allows the integration of an RCF RDNet module into the mixer, to provide an added control through RDNet networking devices. The serial control port can be set to work with remote controls, such as the RCF TS 9918. Up to 12 paging BM 3003 microphones can be daisy-chained to the dedicated RJ 45 connector.40-bit floating point processing DSP, and 48 kHz 24-bit HI-Q Analog/Digital Conversion, dynamic range >112 dB8 universal inputs with 48 VAC phantom facility and full audio processing, 4 hi-level routable balanced outputs with full audio processing2 hi-level linkable outputs with full audio processing and low-pass crossover facility10 programmable logic GPI inputs, 6 programmable GPO logic outputs (2 are relay supported)Configurable parametric EQs, gates, compressors, limiters, delays, priority levels, automatic gain control, levels, gains on in-out and cross points, auto-mixer operations, filters.Each unit can work as dual-room combiner with independent auto-mixer facility for each roomConfigurable ALC (Automatic Level Control) facility using Input 8 to connect a noise detection microphone. The control is then assignable to any output or group of outputs.USB connectivity for device configuration

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay

 

 


Category: Musical Instruments:Pro Audio Equipment:Other Pro Audio Equipment
Location: Clevedon