Truetone 1-Spot PRO CS7 Effects Pedal Power Brick (NEW)

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Truetone 1-Spot PRO CS7 Effects Pedal Power Brick (NEW)

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.

Truetone 1-Spot PRO CS7 Effects Pedal Power Brick (NEW) The Truetone 1-Spot PRO CS7 is their first #39;brick#39; style power supply and offers unique features.
Truetone 1-Spot PRO CS7 Power Brick Main Features7 fully isolated outputs5 voltage options provide power for virtually any effect pedalDesigned with cutting-edge technology, not just transformersIncludes brackets for mounting under Pedaltrain® pedalboardsCables and converter plugs includedSwitchable Worldwide Input Voltage

1 SPOT Technology
1 SPOT Technology… what does that mean and why should I care? Technically, it's switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of small electronic components inside a power brick… old tech that hasn't changed in decades and has a lot of limitations. Truetone took the same switching power supply technology found in their famous 1 SPOT and scaled it up to make the 1 SPOT Pro models. With much more space to work with, they were able to completely eliminate noise, provide total electrical isolation between outputs, create multiple voltages, and still give you the ability to use it anywhere in the world.

A major benefit of using a switching power supply is that it can handle far more current (power being pulled out of it) than any transformer-based power supply. Although they had to put power rating labels on each output to satisfy certification agencies, the outputs can generally handle far more than the label shows. For example, you can connect a 300mA pedal to a 200mA output, without causing any problems. With a transformer-based power supply, you can't get away with that. The important thing is to not exceed the total of all the labels. With a CS7, the output labels add up to 1900mA total. That means the total current draw of all your pedals should be less than 1900mA. That total current rating is roughly double the current load of the most common power brick, for a lot less money.

Multiple Voltages
While most pedals still run off 9VDC, not all of them do. That's one of the main reasons why Truetone finally decided to design the 1 SPOT Pro. With the CS7, you get one output for 18VDC and six at 9VDC, with four of those switchable to 12VDC. Need another 18VDC output? No problem… just get a Multi-Plug 2 cable (MC2) and run both pedals off that one outlet… most boosts and drive pedals don't mind sharing an output anyway. Don't need the 18VDC output at all? No problem… just get Truetone's 18V to 9V Converter cable (V189).

Worldwide Input Voltage
Just like with the original 1 SPOT, and your laptop power supply and phone charger, the 1 SPOT Pro uses switching power supply technology which allows you to use it anywhere in the world.

Rugged Steel Housing
If you're a touring musician, or even if you just play at the local pub regularly, you know how important it is to have roadworthy gear. No worries with the 1 SPOT Pro. The housing is all steel, with cleverly designed vents that should keep out the accidental beer spill, should that ever happen.

Pure Isolation
Since pioneering the first switching power supply for musicians, the original 1 SPOT, Truetone have gained many years of experience in creating very low noise power for pedals. When they started designing the 1 SPOT Pro, their first multiple output switching power supply, they worried a lot about how to eliminate noise completely. Isolation is part of the solution to noise elimination, but not all of it. Each output is galvanically isolated from the other to help give you pure, clean, noise-free operation of your pedals. However, they also provided an additional layer of pure analogue regulation, taking advantage of the greater ability of analogue circuits to provide the highest possible suppression of in-band audio noise.

Pedaltrain Mounting Brackets
The only power brick to include easy-to-install mounting brackets for Pedaltrain pedalboards. Truetone even duplicated the output labels under the unit, so you can easily see which output is which, when working on your board.

Energy Efficient
Prior to the 1 SPOT, musicians either used one linear power supply (a.k.a. wall wart) per pedal, or used batteries. Both solutions for powering pedals were very inefficient with energy, with batteries also contributing greatly to the toxic waste stream.

In 2000, Truetone pioneered the use of switching power supply technology to alleviate this condition in an economically-, energy- and environmentally-conservative way. The 1 SPOT power supply was designed to replace many such external power supplies and/or batteries simultaneously. It provided plenty of power with a very low noise level to successfully meet the needs of musicians.

By offering musicians a solution that was more cost effective and energy efficient, and moving the market away from linear transformer-based power supplies to switching power supplies, Truetone has caused the saving of thousands of watt-hours per musician per year.

Utilising a more comprehensive switching power supply solution, the 1 SPOT Pro sets a new level of efficiency for power bricks, while still meeting the needs of musicians for low noise operation, even in severe conditions where the pedals themselves may generate interfering noise.

Cables
The 1 SPOT Pro CS7 includes a generous assortment of cables and converter plugs. The cables are of various lengths, colour-coded for easy cable management and with right angle plugs on the pedal end.

Power cables (all are centre pin negative polarity):
(4) DC18 (5.5×2.1mm barrel plugs: 18 inch (457mm) – White
(3) DC12 (5.5×2.1mm barrel plugs: 12 inch (305mm) – Yellow

Converter Plugs:
(1) CL6 – (5.5×2.1mm barrel input, 5.5×2.5 barrel output: reverse polarity)
Green – for Line 6 DL4/M9/etc. and some Eventide pedals.
(1) CYR – (5.5×2.1mm barrel input, 5.5×2.1 barrel output: reverse polarity)
Red – reverse polarity converter
(1) C35 – (5.5×2.1mm barrel input, 3.5mm male output: tip positive)
Black – 3.5mm (1/8 inch) plug converter
(1) CBAT – (5.5×2.1mm barrel input, Black battery clip output) Connects to battery clip wires inside pedals that do not have DC jacks. Do NOT connect to a battery! Listing correct at time of upload errors and omissions excepted.This is brand new item and comes with a full UK warranty and VAT receipt. Payment

 

We prefer payment by PayPal.
About Us

 

absolutemusic was set up over ten years ago by a group of passionate audio professionals who wanted to deliver better service and greater savings on music gear than could be found anywhere else.We’ve since grown into one of the UK’s leading music retailers and we’ve recently moved into a  huge new two-storey superstore boasting three massive guitar display walls and dedicated departmentsfor drums, guitars, DJ, live sound, synths & keyboards, hi-tech and accessories. We also have four guitar booths, two soundproofed drum booths, an in-house Guitar Workshop and a unique  monitor-auditioning studio designed byacoustician Andy Munro.Next door is our café and complex of rehearsal and tuition studios available for hire seven days a week, where we also run regular workshops, instrumental lessons, demo events and recording sessions. Soon to be added is a  professionalrecording studio and control room.Every member of our 50-strong absolutemusic team is an experienced musician or engineer who can offer you accurate, expert advice on anything from vintage guitars to the latest software. We pride ourselves on alwaysrecommending the right products for the job, most of which can be sent out on next-day delivery!As well as our busy sales and studio departments, we have a super-supportive Technical Support department who can offer advice and help with your gear, and a  flexible Hire Department offering a wide range of gearavailable for your upcoming events.Join us here soon to see our amazing 14,000-square-foot showroom and 10,000-square-foot studio complex, and to enjoy our regular in-store events. (absolutemusic, Knighton Heath Estate, 855 Ringwood Road, Bournemouth, BH11 8NE) Shipping

 

We deliver all items, except items worth less than 30, by insured courier.
In most cases we can deliver items within a couple of working days. We will contact you should delivery be delayed. Exceptions may apply to non-mainland destinations, the very north of Scotland and non-UK destinations.
Before sending goods, we will contact you via email to let you know when we will be shipping and provide you with tracking information.
Most items are delivered on an overnight service ( 2-3 days for non-mainland UK and 3-5 days for mainland Europe ). If you are in the UK, but not on the mainland, a delivery surcharge may apply and the service may vary. This depends on item size and destination but for most items to Northern Ireland for instance, this surcharge is 10. For more details, please contact us.
For details, please contact us Contact Us

 

If you have any questions regarding this item, shipping, payment or anything else, please feel free to contact us.

Our store opening hours are:
Monday – Saturday: 10.00am – 6.00pm
Sundays and Bank Holidays (Except Christmas and Easter Sunday): 10.00am – 4.00pm Please note, our Web team are only in Monday to Friday

If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay

 

 


Category: Musical Instruments:Pro Audio Equipment:Other Pro Audio Equipment
Location: Bournemouth