If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
Acoustic Tuning: Use graphic equalization to fine tune any sound system to match the acoustics of a studio, concert hall, or any other sound environment. It can also be utilized to compensate for serious acoustic irregularities found in rooms that were not designed for music listening and keep properly designed studios or halls at their optimum sound level.Feedback Control: In situations where restrictions make a feedback proof setup impossible, Yamaha graphic equalizers can be used to reduce the gain of problem frequencies, thus minimizing the possibility of sudden outburst of feedback that can ruin a performance.Sound Shaping : Yamaha graphic equalizers are also creative tools that can shape the tone of an instrument or voice to achieve a better blend in the mix. When added to reverb, EQ can electronically simulate a wide range of acoustic environments.Noise Suppression: Graphic equalization can effectively minimize tape hiss, stage rumble, wind noise, microphone popping, excessive sibilance, and other sources of unwanted noise.Frequency response: 20 Hz – 20 kHz, +/- 0.5dB @ +4dB* 600 ohms
THD: < 0.05% (THD+N), 20Hz - 20kHz @ +4 dB* 600 ohms, Eq all flat (0dB)
Hum & noise: (Average, Rs=600 ohms BPF : 20Hz – 20kHz): -96dB
Maximum voltage gain: 0dB input level at max.
Centre frequencies: 15 band (2/3 octave) 25, 40, 63, 100, 160, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 10k, 16kHz
Range: switchable 6dB or 12dBInput Impedance: 15k ohms
Source Impedance: 600-ohm Lines
Nominal input level: switchable -20dB or +4 dB (1.23V)
Maximum input level before clipping: +24 dB (12.3V)
Input connectors: XLR-3-31 Type & Phone Jack (TRS)Output Impedance: 150 Ohms
Load Impedance: 600-ohm Lines
Nominal output level: switchable -20dB or +4 dB (1.23V)
Maximum output level before clipping: +24 dB (12.3V)
Connectors: XLR-3-32 Type Phone Jack (TRS)(A, B)Indicators: Green LED on each channel turns on when EQ is on. Red LED on each channel turns on when post-EQ signal reaches the level 3 dB below clipping. Green LED on each channel turns on when post-EQ signal reaches the level 13 dB below nominal level.
Power requirements: AC230V 50Hz
Dimensions: 480 x 49.4 x 230mm (1u)
Weight: 3kg
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Musical Instruments:Pro Audio Equipment:Signal Processors and Effects
Location: Lamberhurst